2017/07/24

Display Weeks 2017 Los Angeles – “Almost Heaven”




Los Angeles is Spanish for "The Angels". Because of that, the city is often referred to as “The City of Angels”. This year was the first time back in The City of Angels for the Display Week Show since 2011. A special session focusing on automotive displays was added this year, which brought some new exhibitors. This product shows how the rearview mirror can be used as a display for a rear mounted camera to not only show what is happening behind your car, but a second smaller insert display provides other useful information to the driver at the same time.
Of course the traditional display applications were being shown as well. The ultra-thin “Wall Paper OLED TV” was very impressive to see. When the TV is mounted, it almost looks like a picture hanging on the wall.

There were less curved displays this year compared with the previous years, but some exhibitors showed them for gaming and digital signage applications. Overall, there was a lot of energy at the show, and we could meet some old and new customers there.

The big highlight of Display Week for me personally was the location. The LA Convention Center is located next to the Staple Center Arena. The Staple Center is the home of the Los Angeles NBA professional basketball team, the Lakers. I have been a Lakers fan for over 40 years, which may be odd since I grew up in Pennsylvania not California. It was very cool to see the life size statues of former Laker great players in front of the Staple Center every morning as we entered the Display Week Show.




It was “almost heaven in the City of Angles” for me all week!


FINETEC Japan in Tokyo (April 12-14 2017)

We had a booth in the FINETEC JAPAN at Tokyo big site.
Thank you very much for all visitors!!





SID 2017 in Los Angels (May 23-25 2017)


We had a booth at Display week Los Angels in May 23-25.
Thank you very much all visitors !!





2017/01/05

Happy New Year 2017 from Sun-Tec









Happy New Year!

Thank you for the opportunity to work with you in the previous year. We look forward to continued success together in the upcoming New Year.
Each year Sun-Tec selects one Kanji character at the beginning of the New Year as our focus. This year we selected the character 信 (Shin) “Belief/Trust”.
Last year there were big changes in politics, such as UK leaving the EU, Mr. Trump being elected as President in the U.S., etc. It is said that depending on the U.S. policies in 2017, the power balance of world politics and the economy may change drastically. We don’t know how that will affect our business.
No matter how the environment changes, Sun-Tec will continue trust in each other, manufacture products that customers can trust and rely on, and work hard to make machines that will increase the number of companies that know and trust the Sun-Tec name. That is why we chose this word.


Sun-Tec employees will continue to “Devote our soul to each machine” to meet our customers’ expectation.
We appreciate your continuous support of Sun-Tec machine in 2017.


President, Ryoji Matsumoto
Sun-Tec Co., Ltd.

January 2017

Here is the our new year's group pictures..

Head office (Amagasaki(Osaka), Japan)





















Sendai Factory (Kagoshima, Japan)






















Tokyo Office (Tokyo, Japan)






















SUN-TEC CO., LTD.

We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry since 1976.

http://www.sun-tec.net/













2016/04/12

Thank you for visiting Finetech 2016

Hello, We had a booth at Finetech Japan (2016/04/06-08) at Tokyo big site.
We have had many visitors for the 3 days.


This show's hot topics are "OLED display" and "Curved surface lamination"

And we displayed 3 machines below....

Sheet to Sheet lamination machine "MPF-40s"
2D curved lamination in normal environment "APF-07S-SP"
Taping machine "ST-T1"

Since there are many visitor all the time, we could not talk much some of you.
So please contact us if you have further questions. please send us message.

Email : st-inquiry@sun-tec.net












Thank you and hope to see you very soon !


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry since 1976..

2016/01/03

Happy New year 2016 from Sun-Tec




Happy new year readers!
Thank you for visiting our blog.
And if you are our machine user, we could have a new year because of your support.Thank you very much!

At the beginning of every new year, we post a word on our office/factory walls (Kanji character) to focus on for the year.
This year 2016's word is 『感謝 Kansha』- which means "Thankfulness/Grateful".

This year is our 40th anniversary year. It cannot make it just ourselves, we have been supported by our machine users, suppliers, agents and employees families. So we have to keep "Thankfulness" in our mind once again and try to make a great anniversary year.

We believe we need to continue our very best for each machine production in this year then it would allow us to step another year.

Ryoji Matsumoto, President / Sun-Tec Team

Here are our new year group photos from each location


Head Offic in Amagasaki, Japan



Sendai Factory in Kagoshima, Japan



Tokyo Office in Tokyo, Japan






SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry since 1976.

http://www.sun-tec.net/

2015/03/09

2015Flex Conference in Monterey California

Every year in February the FlexTech Alliance sponsors their industry conference focusing on flexible substrates and flexible electronics.Each year for the past four years the show has been held in Phoenix Arizona. But there were two things different about this year’s show. First, this year’s show site was moved from the desert of Phoenix, to the ocean side city of Monterey California. The second thing different about the 2015 edition was that We, Sun-Tec attended the Conference as the “newest FlexTech Alliance member”! We were officially became a member of the FlexTech Alliance in January of this year.

And, Our Sun-Tec America General Manager Raymond C. Wiley was one of the three presenters on the Thursday agenda for Conference Session 24 covering the topic of “Adhesives for Manufacturing”. The focus of his presentation was “Future Challenges for Flexible Substrate Lamination Processing in Manufacturing”. In it he talked about Sun-Tec’s MPF equipment series and some of the many challenges we face with our customers when there is a new product moving into production. He also highlighted the need for early engagement and close collaboration with the customer when the project starts to avoid delays later.


Thank you for the audience for the presentation.
We are honor to become the member of FleTex Alliance. Thank you very much.

If you are interested in our technology, please contact us anytime!

Sun-Tec America, MW


About FlexTech Alliance FlexTech Alliance(From their website) : The leading US industry association focused on growth, profitability, and success throughout the manufacturing and distribution chain of flexible, printed electronics, and displays.
By facilitating collaboration between and among industry, government, and academia,
FlexTech Alliance develops solutions for advancing these technologies from R&D to commercialization.
Learn more at www.FlexTech.org.

SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry since 1976.

http://www.sun-tec.net/

2015/01/07

Happy New Year 2015 from Sun-Tec

しん
A Happy New Near!
We wish that 2016 finds you happy and successful.
And for our machine users; Thank you very much for your support in 2015 and supporting us continuously in this year.


At begging of every year, we post a word on our office / factory walls (Kanji character) to focus on for the year.
It have been 10 months for new administration.
We have been challenging for various "Automatic Attachment" solutions as a FA machine maker since 1976.
We will not be satisfied about the our present and keep going with the challenge spirit as New Sun-Tec..

In 2015, 3 Japanese scientists won the Nobel prize for Blue LED.
We are very proud of it and it reminds us that we are also a parts of Japanese engineering developer and we have to keep best effort to keep the qualities.

2015.01
Ryoji Matsumoto, President
Please find our group photos in this year. Head office in Amagasaki Japan

SendaiFactory in Kagoshima Japan

Tokyo Office

Sun-Tec America in Arizona




SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry since 1976.

http://www.sun-tec.net/

2015/01/06

Fresh Start For New Year

October 15, 2014 was my two year anniversary at Sun-Tec America as the General Manager. Less than two months after starting in my new role I was asked to come to the Sun-Tec headquarter office in Japan to present my strategies and focus for Sun-Tec America. The opening slide of my presentation to the Sales, Marketing, and Management team was very simple. It had only two lines, which were set in PowerPoint to appear one line at a time with a click of a button on my laptop.
The first line appeared and read, “Congratulations Sun-Tec!” I went on to say how Sun-Tec had successfully overcame the odds of staying in business as a company for more than 35 years. No small feat given that most start-ups in the US fail in the first 5 years, and the odds of getting past the 10 year mark are even smaller. I went on to complemented the Sun-Tec Management for having a vision for where they wanted the company to go, and the wisdom and skill to make adjustments as needed to overcome the market changes and challenges that Sun-Tec faced over those 35 plus years. Job well done!
I clicked the button on my laptop and the second line on the opening slide appeared which said, “What’s next?” That simple two word question had a lot of possibility for audience to think and interpret it in many different ways. My intent was to provoke thought by each person in the room about what was really behind that that two words question. The purpose of putting that question on the same slide along with the congratulatory message was this, “We need recognize the accomplishments of the past, but we cannot continue to live in the past.” To continue to be successful, we need to have the same vision. The same aggressive survivalist spirit. And the same “can do” attitude that Sun-Tec had when it was founded more than 35 years ago.
There is a saying, “The only constant in life is change.” The market will change. The technology will change. The customers and their requirements will change. But we need to be ready to handle “What’s next” when it happens. So in reality, that means the future of the company, (or “What’s next?”) is really in the hands of each of us as employees of Sun-Tec.
There is a long standing New Year tradition that has taken place since Sun-Tec was founded. The tradition has now been passed to our new President, Mr. Ryoji Matsumoto. At the start of each year a Kanji character is selected by our President. The meaning of this Kanji then become the focus of our company for that year. The Kanji chosen by President Matsumoto for the year 2015 is “Shin”, which can mean “new” or “fresh”. Much better than my two word question of “What’s next?”, this single word has the potential to be applied in many ways for our business.
In 2015, we can focus on “fresh” ideas with a “new” approach. We can focus on “new” equipment designs. We can focus on finding “new” customers, “new” applications, and “new” markets. As employees, we can adopt a “fresh new” attitude and work habits. All of these things will help to make Sun-Tec a stronger more successful company.
President Matsumoto has the one word answer to my two word question. “Shin” is “What’s next”!


By Raymond C. Wiley, Sun-Tec America, LLC

SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

http://www.sun-tec.net/

2014/05/21

2014 SID Show Preparation

Well it’s that time of year again. Baseball season has begun, the “official” first day of summer is four weeks away, and we are making last minute plans for the annual Society for Information Display's (SID) symposium and tradeshow. This year the Display Week Show will be held in San Diego California from June 1-6. As we have done for the past eight year in a row, Sun-Tec America will once again exhibit our Display Taping and Lamination Equipment at the SID Show in an attempt to find new customers and stay connected with past customers. The next seven days leading up to the show will be hectic as we make final plans to insure another successful event. But something seems a little different this year compare to years past.


M. Matsumoto and M. Choi - 2004 SID Show

No matter how busy we are at the moment preparing for the upcoming show, it is impossible to ignore the fact that two very familiar faces will not be at the show with us in the Sun-Tec America booth this year.
In December of 2013 Sun-Tec President Mitsuo Matsumoto announced his retirement and in February moved into the role of Chairman. Everyone knows the story of how Matsumoto-san started Sun-Tec more than 35 years ago and helped to make it into the company that it is today. While in January of 2014, Mr. Michael Choi, who was the founder of Kenix Industries (the first Sun-Tec US Sales Rep), also announced his retirement. Michael was also a Technical Sales Consultant for Sun-Tec America and played a major role in opening the Sun-Tec America office in Scottsdale Arizona as an advisor. We will miss seeing these two pioneers in the Sun-Tec booth at SID this year 4in San Diego.

So we say good-bye to them both, and wish them all the best as they begin their newest challenge, “retirement”. But I have a feeling that we will see them both together again somewhere…not in the Sun-Tec booth at a tradeshow. More like on the tee box at a golf course.

RCW Sun-Tec America LLC

SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

SUN-TEC WebSite http://www.sun-tec.net/english

2014/04/28

Introduce Our New prsident and Thank you for visiting Fintec 2014

Hello, readers
We have two good news !

1. Ryoji Matsumoto has appointed as new president since March 2014


We are happy to announce you that we have new president.

Ryoji Matsumoto
He has been working for Sun-Tec for 24 years and former executive director.
We will be "New Sun-Tec" under him.
We keep trying to provide better machine and service.
Thank you for your continuous support.



And, we exhibited in Fintech 2014 in Tokyo big site.
This year we displayed .. High accuray roll to Sheet laminationa machine Model: R2S-12S-V-CV This machine achieves +/-50 um lamination accuracy!

And
Curved surface lamination machine Model: APF-07S-SP This machien laminate a film on curved surface without vacuum chamber.

We had many visitors again. Thank you very much!

Thank you very much for reading this!
Sun-Tec


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

2014/01/06

A happy new year from Japan

We believe you had a happy holidays.
Our company's president writes "a word for the year" at every beginning of the year.
Here is the word of 2014 for Sun-Tec.

"誠 Makoto".


It means " Royal, Truth, sincerity and good faith".
Sun-Tec's company motto is " Think and see as the customer's position".
And we always create the machine and provide the service with sincerity..
However, we will think about that once again for this year and try to provide best machine and service for each of our customer and all people we will have chance to meet..


We will try our all best again for 2014.
Best wishes for a successful and rewarding year from us to you and your family.


Head quarter in Amagasaki, Hyogo 20140106


Sendai Factory in Satsumasendai, Kagoshima 20140106


Tokyo Branch in Tokyo 20140106


Sun-Tec


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

2013/12/05

Randy and Raymond Talked!

Hello! Our General Manager Raymond Wily talked with Randy Frank in SensorTips about the use lamination technology for improve touch sensor manufacturing...

Click the image below, you can listen their discussions!


http://www.sensortips.com/frank-talk/touch-sensors-use-lamination-technology-enhanced-manufacturing/ Any question? Please contact us!!

Sun-Tec


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

SUN-TEC WebSite http://www.sun-tec.net/english

2013/11/10

Sun-Tec machine with Robot @ International Robot Exhibition in Tokyo

The International Robot Exhibition 2013 has opened today at Tokyo big site.

We, Sun-Tec is exhibiting a "Robot integrated labeling solution system" in the MITSUBISHI area.
This is the first time for us to participate in this show!

This time, we are introducing this system...
Please click the image below. a short movie is started.


The system outline :Sun-tec original label dispense system feed the label and then the robot pick up them with vacuum pad hands and then apply the label for the surface which is narrow and rounded.


And...personally, I like to see the movement of the applying...
It does very careful work..doesn't it??

The show opens until Saturday, November 9th at Tokyo bigsite.
We are waiting your visit!!
Please find us in the "MITSUBISHI" area!



Sun-Tec YS


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

SUN-TEC WebSite http://www.sun-tec.net/english

2013/09/17

Head of Mt.Fuji from Mt.Aka peek

In the last 7~8 years, I have climbed over 2,000m mountain once a year.
In this year, I went to Mt.Aka (Yatsugatake) 2899m.


I did not record clearly yet I am remembering where I climbed...
2012  Mt. Haku (Ishikawa prf) 2,702m
2011 Maybe.. I didn't
2010 Mt. Fuji 3,776m
2009 Mt. Senjo 3,032m & Mt.Kaikoma 2,967m 
2008 Mt. Kisokoma 2,956m ( used ropeway car)
2007 Mt. Shirouma 2,932m & Mt. Norikura 3,026m

I think I did few more..
I always feel very tired to walk and regret when started walk.
And It is getting better after 2 hours..(and you did not want to go back anyway to the route you came)
And then when you reach the peek ..You see the different world...you have cloud see under your feet and there is a long ridge line....
And I love making coffee with seeing such view!!

I appreciate my friends who taking me there and glad we climbed down safely again.

HQ Sales Dept YS


SUN-TEC CO., LTD.
We create high accuracy and efficient film/Panel Lamination machines for display manufacturing industry over 35years.

SUN-TEC WebSite http://www.sun-tec.net/english